W5500 RP2040 PICO
================



.. image:: ../../_static/w5500pico.png
    :align: center

Wiznet W5500 Pico board
	

Remora Details
--------------
| **Board:**   Wiznet W5500 Pico board
| **MCU:**	RP2040 
| **Communication:**	ethernet
| **Firmware:**	      2.0 or newer https://github.com/scottalford75/Remora-RP2040-W5500/tree/main/firmware
| **Firmware Source:**		https://github.com/scottalford75/Remora-RP2040-W5500
| **LinuxCNC Driver:**      "remora-eth-3.0"
| **PRU Base Frequency:** 40000
| **Supported Modules:**    
* stepgen
* digital IO
* blink




.. note::

Firmware
---------
Loading the firmware something uf2



Config
------



| **W5500-evb-PICO CONFIG:**      https://github.com/scottalford75/Remora-RP2040-W5500/blob/main/LinuxCNC/Configs/remora-rp2040/w5500-evb-pico-config.txt



Hardware Pins
-------------
Remora firmware has some features available only on specific hardware pins. There are none avaiable at this time. 


Wiring
------

hmm placeholder. not sure what to put here

	
UART wiring info
----------------

usb?