NVEM2 with STM32F207
================



.. image:: ../../_static/nvem2.png
    :align: center

NVEM2
	

Remora Details
--------------
| **Board:**   NVEM2
| **MCU:**	STM32F207 
| **Communication:**	ethernet
| **Firmware:**	      1.0 or newer https://github.com/scottalford75/Remora-NVEM/blob/main/Firmware/
| **Firmware Source:**		https://github.com/scottalford75/Remora-NVEM
| **LinuxCNC Driver:**      "remora-nv"
| **PRU Base Frequency:** 40000
| **Supported Modules:**    
* stepgen
* digital IO
* blink
* spindle 




.. note::

Firmware
---------
Loading the firmware something stlink



Config
------



| **STM NVEM CONFIG:**      https://github.com/scottalford75/Remora-NVEM/blob/main/LinuxCNC/ConfigSamples/remora-nvem-basic/config.txt



Hardware Pins
-------------
Remora firmware has some features available only on specific hardware pins. 

| analog pins


Wiring
------

hmm placeholder. not sure what to put here

	
UART wiring info
----------------

rs232 ?