W5500 RP2040 PICO

_static/w5500pico.png

Wiznet W5500 Pico board

Remora Details

Board: Wiznet W5500 Pico board
MCU: RP2040
Communication: ethernet
Firmware: 2.0 or newer https://github.com/scottalford75/Remora-RP2040-W5500/tree/main/firmware
Firmware Source: https://github.com/scottalford75/Remora-RP2040-W5500
LinuxCNC Driver: “remora-eth-3.0”
PRU Base Frequency: 40000
Supported Modules:

  • stepgen

  • digital IO

  • blink

Firmware

Loading the firmware something uf2

Config

W5500-evb-PICO CONFIG: https://github.com/scottalford75/Remora-RP2040-W5500/blob/main/LinuxCNC/Configs/remora-rp2040/w5500-evb-pico-config.txt

Hardware Pins

Remora firmware has some features available only on specific hardware pins. There are none avaiable at this time.

Wiring

hmm placeholder. not sure what to put here

UART wiring info

usb?