NVEM2 with STM32F207

_static/nvem2.png

NVEM2

Remora Details

Board: NVEM2
MCU: STM32F207
Communication: ethernet
Firmware: 1.0 or newer https://github.com/scottalford75/Remora-NVEM/blob/main/Firmware/
Firmware Source: https://github.com/scottalford75/Remora-NVEM
LinuxCNC Driver: “remora-nv”
PRU Base Frequency: 40000
Supported Modules:

  • stepgen

  • digital IO

  • blink

  • spindle

Firmware

Loading the firmware something stlink

Config

STM NVEM CONFIG: https://github.com/scottalford75/Remora-NVEM/blob/main/LinuxCNC/ConfigSamples/remora-nvem-basic/config.txt

Hardware Pins

Remora firmware has some features available only on specific hardware pins.

analog pins

Wiring

hmm placeholder. not sure what to put here

UART wiring info

rs232 ?